كيف يتم تنظيف معدات مراكز الألعاب الداخلية؟

Cleaning and maintaining indoor play centre equipment is a key step to ensure its safety, extend its service life, and keep it in good working condition. The following is a comprehensive guide to cleaning and maintaining indoor play centre equipment:

1. Classification and cleaning of indoor play centre equipment

1) Cleaning of the ball pit

Ocean balls are loved by children for their bright colors, but they are a bit troublesome to clean. If the number is not particularly large, we can use a fishing net or a basin to collect the ocean balls in the ball pool, and first give the bottom of the ball pool a thorough cleaning. Then dilute and soak them with soapy water, disinfectant laundry detergent, bleaching powder, or detergent, wash the ocean balls, and dry them.

If the number of ocean balls is particularly large, then the ocean ball washing machine is a good helper. It can not only clean and disinfect, but also dry, with high work efficiency, which can help you save a lot of time.

2) Cleaning of the sand pool

Cleaning of the sand pool is also very important. Fine sea sand can be sprayed with disinfectants extracted from traditional Chinese medicine, which is very effective and naturally decomposes without residue. Cassia seeds need to be exposed to the sun for sterilization and cannot be washed with water; they are easy to germinate. The garbage in the sand pool should be cleaned up in time to keep the sand pool clean.

3) Plastic and fiberglass parts:

Slides, wooden horses, cars, and other plastic indoor play centre equipment are also common in indoor children’s playgrounds. For small and movable amusement equipment, such as wooden horses and cars, we can directly scrub them with soapy water, and for large and immovable amusement equipment, such as slides, we can scrub them with a wet cloth dipped in soapy water. Finally, wipe them dry with a dry cloth.

4) Soft sponge part:

Soft materials such as sponges can be scrubbed with a soft cloth dipped in soapy water and then exposed to the sun for disinfection. This not only cleans, but also prevents bacteria from growing.

5) Wooden parts:

Pay attention to the cleaning of wooden parts. The parts that are moisture-resistant, heat-resistant, and non-fading can be soaked in soapy water and dried, and then sprayed with 84 disinfectant for disinfection. This can keep the beauty and hygiene of wooden parts.

6) Metal parts:

If you need to remove rust, you can use a brush to remove the loose rust and wipe it with a dry cloth.
After exposure to the sun, you can spray colorless self-spray paint for protection.
After the paint is completely dry, clean, dry, and disinfect.

7) Electronic parts:

Be careful when cleaning circuits and electrical appliances. Make sure to wipe with a wet cloth after the power is turned off, and then connect the power after it is completely dry.

2. Cleaning of special areas

1) Activity room, floor, and walls:

The floor and walls are the most easily overlooked places. Remember to disinfect with ultraviolet light regularly, and keep the room ventilated. Spray with a disinfectant containing peracetic acid once a week to ensure cleanliness and hygiene.

2) Toilet area:

Disinfection is required every one or two days, focusing on cleaning the toilet, handles, and faucets.

Use a suitable disinfectant, such as 3% Lysol disinfectant.

3) Drainage and drying

Open-air slides and drill tubes:

There should be no water accumulation after rain. If there is water accumulation, a hole with a diameter of 4 mm should be opened at the lowest point for drainage.

Overall equipment:

After cleaning, make sure all parts are dry to prevent the growth of mold and bacteria.

3. Safety and maintenance inspection of indoor play centre equipment

Connection parts:

While cleaning and disinfecting, it is necessary to check whether the connection parts of the equipment are firm.

Metal movable connection parts:

Lubricate regularly to reduce wear and extend service life.

Circuit and components:

Check whether the circuit, electrical appliances, and ordinary components are damaged. If damaged, they should be replaced or repaired in time.

4. Other precautions

Cleaning supplies selection:

Choose cleaning supplies that are harmless to the equipment and avoid using strong acid or strong alkaline cleaners.

Cleaning frequency:

Develop a reasonable cleaning plan based on the frequency of use and degree of dirtiness of the equipment.

Safety warning:
During the cleaning and maintenance process, safety warning signs should be set to prevent others from misoperating or entering the cleaning area.

Record and Track:

Record the date, content and results of each cleaning and maintenance to track the maintenance of the equipment.

In summary, cleaning and maintaining indoor play centre equipment requires meticulous work and professional knowledge. By following the above guidelines, you can ensure the hygiene, safety and good operating condition of amusement equipment, providing visitors with a pleasant and safe playing environment.

The Professional Maintenance Schedule

الأسئلة الشائعة

Q: What is the most efficient way to clean a large ball pit?

ج: Using an automated ball cleaning machine is the industry standard. It can wash, disinfect, and dry up to 10,000 balls per hour, ensuring deep sanitation without the high labor costs of manual scrubbing.

Q: Can strong chemical disinfectants damage playground equipment?

ج: Yes. Harsh chemicals like bleach or ammonia can degrade PVC coatings and cause plastic embrittlement. We recommend using hospital-grade, non-toxic disinfectants that are specifically labeled safe for children’s environments and sensitive materials.