In a trampoline park, safety is the primary concern. One of the key aspects of ensuring safety is regular trampoline park maintenance and inspection of the equipment. As a professional trampoline equipment manufacturer, we understand the importance of equipment maintenance, and therefore, we will explain in detail how to maintain and inspect trampoline park equipment.
1. Daily Inspection
Daily inspection is the most basic maintenance measure. Before opening each day, staff should conduct a comprehensive inspection of the trampolines to ensure that all components are intact and free from looseness or detachment. In addition, the cleanliness of the equipment should be checked to ensure that there is no dust, dirt, or other factors affecting its use.
2. Regular Cleaning
During use, trampolines accumulate a large amount of sweat and dust, so regular cleaning is necessary. Clean at least once a week, using a special cleaning agent and a soft cloth. Avoid using cleaning agents containing corrosive chemicals to prevent damage to the equipment surface. Also, pay attention to cleaning the ground beneath the trampolines to maintain overall hygiene.
1) General Disinfection Measures for Some Amusement Projects
For cleaning, you can use 84 disinfectant, Dettol disinfectant, soapy water, or disinfectant laundry detergent.
Before use, be sure to dilute the disinfectant according to the instructions to avoid poisoning. Then wipe with a cloth, or use a spray bottle to spray and wipe after diluting the disinfectant solution. It is important to note that it is safer to wait a while after disinfection before playing.
You can also purchase ultraviolet disinfection lamps for sterilization. Hang disinfection record signs in a prominent location in the trampoline park to reassure parents.
The above disinfection and cleaning methods are applicable to naughty castles, physical fitness training equipment, EPP building blocks, wooden building blocks, plastic building blocks, zip lines, dry snow slides, safety nets, climbing walls, ninja courses, and other game projects.
How to disinfect and clean the sponge pit?
Sponge blocks are generally easily damaged, and consumable items, and cleaning them is relatively troublesome. Cleaning is generally not recommended; replacement can be done as needed. Maintenance and disinfection of the sponge pit are recommended, and the specific measures are as follows:
01 Maintain cleanliness in the venue to reduce dust contamination of the sponge blocks.
02 Ensure good ventilation. Humid air may cause the sponge blocks to become moldy and smelly. (Black sponge blocks can be placed on the bottom layer, with different colored sponge blocks on top.)
03 The venue should avoid large-scale and dusty renovations as much as possible. If renovation is unavoidable, please ensure proper covering and protection of the sponge pool.
A comprehensive management system integrating operation, inspection, and maintenance is in place.
04 Please close the ventilation when outdoor air pollution is severe to prevent outdoor dust contamination.
05 Supervision is required; all park visitors must wear socks, and shoes are strictly prohibited inside.
06 Cleaning staff must clean the entire venue once a day.
A comprehensive management system integrating operation, inspection, and maintenance is in place.
07 Bringing water or other liquids into the park is prohibited. If the sponge ball pool is found to be damp or wet, please dry it immediately.
08 The sponge pool should be regularly cleaned of foreign objects at the bottom, and disinfectant should be regularly sprayed to kill bacteria and disinfect.
2) Disinfection measures for toys of different materials
01 Plastic toys can be soaked in diluted soapy water, disinfectant laundry detergent, or bleach, then rinsed with clean water, and wiped dry with a clean cloth or air-dried.
02 Cloth toys can be washed with soapy water or exposed to sunlight.
03 Moisture-resistant, heat-resistant, and non-fading wooden toys can be washed with soapy water and then air-dried.
A comprehensive management system integrating operation, inspection, and maintenance is in place.
04 Iron toys can be exposed to sunlight for more than 6 hours for sterilization.
What attractions are available at a trampoline theme park? A trampoline park manufacturer tells you!
3) Disinfection measures for indoor hardware equipment
01 Activity rooms, floors, walls, etc., should be disinfected daily with ultraviolet light.
02 Indoor areas should be well-ventilated and sprayed with peracetic acid once a week for disinfection. Toilets and urinals should be regularly sprayed with 3% Lysol.
4) Regular disinfection and cleaning of trampoline surfaces and mats
Simply wipe with a damp towel: If there are stains requiring a cleaning solution, it is best to use a non-foaming solution. The towel should be wrung dry before wiping to prevent the inner lining from getting wet, which could lead to mold growth and other harmful bacteria.
Disinfection: Ultraviolet irradiation can be considered for sterilization.
3. Trampoline Equipment Maintenance
Trampoline equipment should undergo routine weekly inspections, and a comprehensive inspection and maintenance of all components should be performed every two weeks to one month. Specific procedures are as follows:
Spring Inspection (Used 300,000 times): Check for deformation and rust; in a static state, if the springs are not stretched, they can continue to be used; if they are stretched, it indicates that their service life has ended and they need to be replaced.
Jumping Surface Inspection: Check for cracks and loose stitching on the jumping surface, and ensure that the Velcro seams are correctly aligned.
Trampoline Soft Padding: Check for surface damage and cracks, loose stitching at the seams, and displacement of the sponge inside the padding (if displaced, open the zipper and rearrange the sponge); check if the soft padding and Velcro seams are misaligned (if misaligned, re-stick and align them properly).
Steel Frame Inspection: Check for loose screws at the fixing points and for broken steel pipes.
Sponge Pit: Clean once a month, remove all sponge blocks, clean the dirt underneath, and wipe the protective mat under the pit;
Wall and Equipment Connection: Check if any wall material is falling off at the connection points.
Safety Net: Check if the net is loose or broken.
If no abnormalities are found, the maintenance time can be shortened based on the actual customer flow.
4. Regular Lubrication
After prolonged use, various moving parts of the trampoline equipment may experience wear and corrosion, affecting the normal operation of the equipment. Therefore, regular lubrication is necessary. Generally, a comprehensive lubrication should be performed every six months to one year. When lubricating, choose a lubricant suitable for the equipment and apply it to the surface of the moving parts to reduce friction and extend the equipment’s service life.
5. Regular Replacement of Consumable Parts
During the use of trampoline equipment, some consumable parts may experience wear and aging due to long-term use. To ensure the safety and stable operation of the equipment, consumable parts need to be inspected and replaced regularly. The specific replacement cycle can be determined based on the equipment’s usage and the manufacturer’s recommendations.
6. Regular Professional Inspection
In addition to daily maintenance and upkeep, it is also necessary to regularly invite professional maintenance personnel to conduct a comprehensive inspection of the equipment. This can identify potential problems, allow for timely repairs and adjustments, and ensure the safety and reliability of the equipment. Generally, a comprehensive inspection once a year is appropriate.
7. Employee Training
Equipment maintenance and upkeep at a trampoline park is not solely the responsibility of technicians; it requires the participation of all employees. Therefore, regular training for employees on equipment maintenance and upkeep is essential. Through training, employees can learn about proper equipment usage, maintenance methods, and other important information, thereby improving the lifespan and safety of the equipment.
FAQ
Q: Does frequent maintenance significantly increase my operational costs?
A: On the contrary, it lowers them. Based on our data, parks that follow a strict preventative maintenance schedule extend their equipment’s lifespan by over 30%. More importantly, it prevents “emergency downtime,” which is far more expensive than the cost of routine checks.
Q: How often should trampoline springs and jumping mats actually be replaced?
A: This depends on your foot traffic. In high-volume commercial parks, we recommend inspecting springs every 12–18 months and replacing them in batches if they show signs of tension fatigue. For jumping mats, any visible fraying or small cracks require immediate replacement to maintain safety standards.
Q: Are maintenance logs legally binding in the event of an injury claim?
A: Yes. A detailed, signed, and dated maintenance log is your best line of defense in a legal dispute. It proves that you, as the operator, exercised “Due Diligence.” This documentation is often required by insurance providers to process claims and can significantly reduce liability risks.
Q: Why is the maintenance of safety padding (soft covers) just as critical as the springs?
A: Because padding wear is often “invisible.” While the springs might be intact, the inner foam of the padding can collapse over time. If the padding loses its impact-absorption capacity, a jumper landing on it could suffer a serious ankle injury. We recommend a quarterly “firmness test” for all safety pads.
